As you continue reading below, we will guide you through the process of how to install SnapSeries CM10 Android 4.1.1 Jelly Bean firmware on Huawei U8150 IDEOS with complete steps in this tutorial. Backup all your data as this tutorial will wipe your personal settings and apps. We have given all the tips below. Let’s proceed with the tutorial now.


Disclaimer: All the tools, mods or ROMs mentioned below belong to their respective owners/developers. We (TeamAndroid.com) or the developers are not to be held responsible if you damage or brick your device. We don’t have you on gun point to try out this tutorial
What’s Working:

• Boot
• Wifi
• RIL (2G&3G)
• Data
• Launcher & Apps
• Audio & Mic
• Lockscreen
• Touchscreen
• Usb Mass Storage
• SD Card
• Charging

What’s not Working:

• Everything else!

Make sure you have installed all your USB drivers for the Huawei U8150 IDEOS to connect it with the computer.

Download Huawei U8150 IDEOS USB drivers! Apart from just the USB drivers, there are a few more things that you need to take care of.

1. You need to enable USB debugging mode. This helps to connect your Android phone with the PC. See here: How to Enable USB Debugging.

2. Your phone battery should be 80-85% charged. If your phone goes off suddenly because of battery, during flashing ROMs or installing mods and updates — your phone might go dead permanently.

3. Backup all your important data that you might need as soon as your flash a new ROM, or make a backup for just in case, you never know when anything might go wrong. See below on how to backup data:

• Backup your SMS messages. 
• Backup Contacts, Gmail and Google Data.
• Backup Call History.
• Backup WhatsApp Messages.
• Backup APN Settings: GPRS, 3G, MMS Settings.

4. Your phone should be factory unlocked. Additional instructions for locked Android devices will be added in the tutorial for unlocking devices.
Now, let’s proceed with the tutorial on the next page and update Huawei U8150 IDEOS to CM10 Jelly Bean 4.1.1 custom firmware.



To Remember:

• This CM10 tutorial is only for Huawei U8150 IDEOS. Please don’t try this on any other variants of the phone.
• Make sure you backup all your data in your phone before proceeding.
• Make sure ClockworkMod Recovery is installed and your Huawei U8150 IDEOS is ROOTED.

If you have fulfilled all the requirements above, then proceed to the actual tutorial.

Complete Step-By-Step Instructions:

Step 1 - Download Android 4.1.1 CM10 Jelly Bean <=<Click Here To Download....
 Huawei U8150 IDEOS to your computer.

Step 2 - Connect and mount your Huawei U8150 IDEOS USB (mass) memory on your computer using the USB cable.

Step 3 - Now copy/paste the CM10 ROM zip file to your SD card. Make sure the file is in the SD card root.

Step 5 - Now to get in the recovery mode. Switch on the phone while pressing and holding the Volume Up + Green Call Key + Power buttons.

Step 6 - Follow the navigation instructions on the screen. Select BOOTLOADER and then go to RECOVERY.

Step 6 - In ClockworkMod recovery, wipe data first. Then scroll down to “flash zip from SD card” and press the power button to select it.

Step 8 - Press the power button again and select “choose zip from sdcard”.

Step 7 -Now using your volume keys, navigate to CM10 ROM zip file and select it using the power button. Confirm the installation on the next screen and the installation procedure should start now.

Step 8 - After the installation completes, go to “+++++Go Back” and reboot the phone by selecting “reboot system now” from the recovery menu. The phone will boot now and it might take about 5 minutes to boot on your first time. So, please wait.


That’s it! Your Huawei U8150 IDEOS should now have Android 4.1.1 CM10 Jelly Bean installed on your phone! Go to Settings >About phone to verify.

Have fun playing with it! If you have any issues, please fire them up in the comments below!